ALZO Suspended Drop Ceiling Video Projector Mount with Scissor Clamp for T-Bar Attachment

• Easy to install on a drop ceiling with 1-inch wide T-Bar frame, with scissor clamp and two (2) 8-inch aluminum suspension rods for 10 or 18 inch drop.
  
• 2-axis locking tilt adjust with maximum 25 degrees pitch makes installation fast and stable
• Mount fits all larger projectors with 3 to 4 mounting screw holes weighing up to 20-pounds, but for projectors over 2 pounds, we recommend reinforcing the T-bar frame with a support wire that attaches to the true ceiling; See Load Specifications tab
• fits Epson, Optoma, Benq, Viewsonic and most other projectors
• Includes scissor clamp and 2 - 8-inch aluminum suspension rods
• Includes an American written installation manual with illustrations and photos
• The projector is not included; it is shown for demonstration purposes only

This easy to install video projector mount can support up to a 20-pound projector* from the T-Bar framing of a suspended drop ceiling. See the Load Specifications tab. The simple assembly includes all metal parts and a kit of assembly screws and hardware. The two-axis locking tilt adjust with about 25 degrees pitch makes installation fast and stable. Attaches to your projector with 3 or 4 legs of the gimbal spider mount. Projector drop from the ceiling is either 10 or 18 inches. 

Fits Epson, Optoma, Benq, Viewsonic and most other projectors.

The maximum spider mount leg span is 12 inches (mount hole to mount hole); angling the legs will slightly reduce maximum leg span. The two-section suspension rod is either 8 or 16 inches long and the mounting bracket Includes an American written installation manual.

Video Projector is not included, it is shown for demonstration purposes.

NOT COMPATIBLE WITH ViewSonic PJD7820HD projector.

* may require adding additional suspended ceiling support wires as indicated in the installation manual.

Click here for accessories

ALZO Suspended Drop Ceiling Projector Mount Installation Manual

The standard rated load of the ALZO Suspended Drop Ceiling Photo Video Projector Mount Kit is 4 pounds, assuming a proper secure attachment of the suspended ceiling T-Bar frame to the true ceiling.

When exceeding 4 lbs. of total supported weight, additional suspended ceiling T-Bar frame support wires must be affixed near the mounting scissor clips to the true ceiling. If the light mount scissor clips are located near the true ceiling support wires, and these wires are sufficient strength, then the weight of the projector could be as high as 10 pounds.