Your Cart is Empty

NISSIN Di600 for Nikon iTTL




NISSIN Di600 for Nikon iTTL

  • The guide number is 144 feet at ISO 100 at 105mm zoom
  • Compatible with Nikon iTTL
  • Reliable exposure under all typical shooting situations
  • Autofocus assist light (infrared) in front of the flash
  • Auto adjust to lens focal length

The elegantly simple design of the Nissin Power Zoom portable flash is an unsurpassed winner. These solid flashes are a perfect companion for the ALZO Flip Flash Mini-Softbox Kit or the ALZO Flip Flash umbrella Kit. The Di600 has a wireless remote flash system as a slave unit. You can enjoy creative flash photography with multiple lightings from the various directions. There are 3 slave modes provided. Slave Digital (SD): Di600 synchronizes to the pre-flash system. The master flash is to be set at TTL (E-TTL for Canon, i-TTL for Nikon and ADI/ P-TTL for Sony) mode. Slave Film (SF): Di600 synchronizes to the traditional single flash system. The master flash is to be set at manual mode. Studio lighting system synchronizes to this mode. This mode is also available for open flash, and for a standard flash in the market. Wireless TTL: Di600 synchronizes to the wireless remote flash system. The master flash is to be set at Channel 1 group A in wireless remote mode. Note: this flash includes a wireless slave mode that works with an on-camera Nissin Flash or a compatible Nikon camera operating in TTL mode with any TTL flash or the on-camera flash. This flash will not work with wireless flash triggers that connect to the hot shoe.

  • Power zoom feature covers lenses from 24mm to 105mm (35mm equivalent)
  • Power zoom head automatically adjusts to lens focal length 24 - 105mm
  • Includes TTL flash compensation (+/- EV control)
  • 5 seconds recycle time at full power; 1 second at 1/2 or lower power
  • Nikon compatible wireless TTL mode for multi-flash lighting
  • SD Mode synchronizes to a pre-flash system setting
  • SF Mode synchronizes to the traditional single flash system
  • Self-contained pop-up reflector card and flash diffuser lens for 80/20 ceiling bounce
  • Manual operation with 1/32 to full power in 6 steps
  • Full 90-degree vertical head tilt adjustment with angle stops and markings
  • 270-degree horizontal head rotation for umbrella or wall bounce
  • Firmware updatable prevents obsolescence
  • Includes PC sync port for radio wireless triggering
  • Requires TTL extension sync cord for off-camera usage
  • Pre-flash auto red-eye reduction
  • Shoe mount is plastic
  • Uses 4 AA batteries (not included)
  • Do not use nickel zinc nizn batteries; if used with this flash, the warranty will be voided